Rankhilfe/Climbing Aid

It's a climbing aid for plants, i made for a friend. The parts are connected with a M42x1 thread…maybe not the best solution, but worked fine for me :)

A little support ist needed for the part you push into your soil.

I would not suggest going above the average temperature, given by your filament.

Too high temperature (215°C for DasFilament PLA) caused a little deformation after printing the first thread and before printing the last thread. It still fits into each other though.

better go for 205°C (my first print was 205 and made no problems at all)

I was printing with 0.15mm layer height for threads and 0.25 for the rest.

I added a .3mf for the settings. Check if you like it, or slice it yourself :P

I also added a TEST.3mf for testing the threads. You can also just cut it yourself.

Have fun with it.