ThermoPro Thermo/ Hygrometer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Small GlueAble Thermometer Holder for the ThermoPro TP157 designed for 3d Printing Chambers with Acryl/Glas
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
My First Project, I hope it Helps,
This Project was Designed in SketchUp, and Printed with the BambuLab P1P
I used rPLA and a 0.4mm Nosle at 0.20mm Printing Height, no Supports, and some Adhesive but later Printed it also without,
(The Green Rod can be later Cuted Away)
This is a Small Holder for the ThermoPro TP157 a Thermometer/Hygrometer
You can Find this at Amazon or the Official Website https://buythermopro.com/product/tp157/ for around 10 Bucks.
I designed it to be Glued Inside a Printing Chamber on a Piece of Glas/Acryl, but if you have a Better way, then please Remix it, I cant wait to see it,
For the Glue I used Contact Adhesive, (I need to say It doesn't look good but it Holds, and that Counts)
You can Easily Insert the Thermometer from the Back and also take it out again, all necessary Ports and Holes for Accurate Reading are Free and not Blocked,
If You Decided to Print it and also Use it,
Thank you Very Much,
Im Still New to 3d Printing and need still Time to learn, However I cant wait for Commentary's and also Remixes from this Small Project, Thanks Again and Cheers :3