Skadis T-Nut Press/Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a two part system to allow the M2.5 hex nut to be pressed into the T-Nut easily.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 2
- Wyświetlenia
- 324
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This model allows for pressing the M2.5 T-Nut onto the M2.5 hex nut without it wriggling around from under the T-Nut.
- Place the hex nut in the printed item labeled HexNutSide.
- Either apply equal pressure with fingernails on the T-Nut or put the T-nut in the printer part labeled TNutSide and apply pressure.
I've had pretty good luck not using the T-Nut side, but sometimes it's a tight squeeze. In the event using the T-Nut side doesn't work using just your hands, there's a groove there to use a pair of channel locks.
Only once did that not work for me in about 50 T-Nuts and I figure that T-Nut just wasn't a team player.
For use with the TM2.5 T-Nut model here:
https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb