Tiny Gridfinity Soldering Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small 1x1 gridfinity block that can hold your soldering iron.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 300
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a tiny soldering iron stand in the form of a 1x1 2u Gridfinity block. There is space for a small soldering sponge. The whole can be collapsed and other Gridfinity blocks/lids can be places on the stand.
The part that hold the soldering iron is made from bent wire with a diameter of 1.5mm. The wire can either be placed centered or offset for better access to the sponge. The wire should preferably be made out of iron/steel, but copper wire is ok too (that is what I use).
I tested the heat resistance by placing a hot iron (as shown on picture) on the copper wire for 20 minutes. Best not to go on vacation with the soldering iron on tho.