Tiny Gridfinity Soldering Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small 1x1 gridfinity block that can hold your soldering iron.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 51
- Makes
- 1
- Views
- 300
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is a tiny soldering iron stand in the form of a 1x1 2u Gridfinity block. There is space for a small soldering sponge. The whole can be collapsed and other Gridfinity blocks/lids can be places on the stand.
The part that hold the soldering iron is made from bent wire with a diameter of 1.5mm. The wire can either be placed centered or offset for better access to the sponge. The wire should preferably be made out of iron/steel, but copper wire is ok too (that is what I use).
I tested the heat resistance by placing a hot iron (as shown on picture) on the copper wire for 20 minutes. Best not to go on vacation with the soldering iron on tho.