1 / 6
Makita Battery Charger DC10SA & DC10SB Wall Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall mount for the 10,8V or 12V Makita charger similar to the approach of @Jeffeb3 for the 18V charger.
- Ocena
- 4,5 / 5
- Polubienia
- 17
- Pobrania
- 195
- Wydruki
- 2
- Wyświetlenia
- 1249
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (41)Powiązane
Makita Battery Charger DC10SA & DC10SB:
This is a wall mount for the 10,8V or 12V Makita charger similar to the approach of @Jeffeb3 for the 18V charger. It fits with the Makita DC10SA and B.
print setting:
- PETG (but PLA should also work)
- 10% infill (increase for more strength but 10% should be fine)
- 2 perimeters
- supports are necessary for the pins (I chose organic supports)
enjoy!