1 / 2
Tesla Wheel Center Cap - Color Inset remix — zdjęcie 1
1 / 2

Tesla Wheel Center Cap - Color Inset remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tesla Wheel Center Cap with some tweaks

Ocena
5 / 5
Polubienia
18
Pobrania
169
Wydruki
3
Wyświetlenia
647
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The original model was very good since the winter tires for my Model Y didn't have wheel caps. Unfortunately the clips got broken when pushing them in, probably because I used ASA for the main part.

So after a while I got an epiphany and modified the clips for more springiness if you will. Now they bend in multiple axes and so far ASA printed clips seem survive the insertion.

Also made the Tesla logo 0.4mm thick so the Tesla logo shows stronger.

There's also cap with no logo available.

OpenSCAD source: https://github.com/spegelius/3DModels/tree/master/Tesla_Wheel_Center_Cap-Color_Inset_remix

Tagi