Tesla Wheel Center Cap - Color Inset remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tesla Wheel Center Cap with some tweaks
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 169
- Makes
- 3
- Views
- 647
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original model was very good since the winter tires for my Model Y didn't have wheel caps. Unfortunately the clips got broken when pushing them in, probably because I used ASA for the main part.
So after a while I got an epiphany and modified the clips for more springiness if you will. Now they bend in multiple axes and so far ASA printed clips seem survive the insertion.
Also made the Tesla logo 0.4mm thick so the Tesla logo shows stronger.
There's also cap with no logo available.
OpenSCAD source: https://github.com/spegelius/3DModels/tree/master/Tesla_Wheel_Center_Cap-Color_Inset_remix