m24 to m20 UK Tap to shower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
24mm male to 20mm male converter. Designed to attach the 20mm shower hose to the 24mm tap aerator thread so I could…
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 193
- Wydruki
- 2
- Wyświetlenia
- 901
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
24mm male to 20mm male converter.
Designed to attach the 20mm shower hose to the 24mm tap aerator thread so I could wash my smelly dog in the bath with the shower attachment.
Threads sized appropriately.
No supports needed.
Best printed with 4/5 perimeters to make the threaded sections solid.
Print at the best resolution your printer will handle as the threads on the 24mm section are quite small to match the tap aerator threads.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.12
Infill:
25
Filament:
Prusament ASA - PLA should be fine
Notes:
I printed in ASA at 0.10 layer height as the thread on the 24mm side is pretty small.
Best printed with high infill, or better still 4/5 perimeters.
Category: Bathroom