5.1 Surround Sound Amplifier Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case was printed on my Creality CR-10S5 in five parts.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Welcome to my first submission.
This surround sound amplifier enclosure was made out of PLA.
It consists of five parts, the main enclosure, the front plate, the top cover, and 2 DAC mounts.
I integrated the standoffs inside for the PCBs that were used. I have a 5.1 pre-amplifer on the front.
In the rear is the digital inputs and the banana jack binding posts.
On the inside is the 24V SMPS power supply, a 5v converter board, the 6 channel Class D TPA3116 amplifier board.
The electronics were purchased on AliExpress
Side Note: The C and K are my two boys :)