1 / 5
5.1 Surround Sound Amplifier Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This case was printed on my Creality CR-10S5 in five parts.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 303
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Welcome to my first submission.
This surround sound amplifier enclosure was made out of PLA.
It consists of five parts, the main enclosure, the front plate, the top cover, and 2 DAC mounts.
I integrated the standoffs inside for the PCBs that were used. I have a 5.1 pre-amplifer on the front.
In the rear is the digital inputs and the banana jack binding posts.
On the inside is the 24V SMPS power supply, a 5v converter board, the 6 channel Class D TPA3116 amplifier board.
The electronics were purchased on AliExpress
Side Note: The C and K are my two boys :)