Desiccant Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 150 x 100 x 20mm desiccant holder for installing in a dry box or similar.
- Ocena
- 4,5 / 5
- Polubienia
- 18
- Pobrania
- 245
- Wydruki
- 2
- Wyświetlenia
- 958
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Simple desiccant holder. The lid slides into grooves, and is retained by a clip. It has either clip-on feet or brackets to slide into. The brackets have modelled in support material that will need breaking off.
If clipping on the feet, they only clip on one way round, with the toothed side on the bottom of the box, and the smooth side on the top.
Suggested material is PETG.
NOT MICROWAVE SAFE! Or rather, the plastic alone would probably be fine, but because microwaving silica gel releases steam at >100°C, the heat of the steam and beads softens and warps the plastic. So remember to recharge your desiccant in a safe container.