1 / 2
Geeetech A10 Pro MCU Fan Cover (GT2560 ver 4.0 board) — zdjęcie 1
1 / 2

Geeetech A10 Pro MCU Fan Cover (GT2560 ver 4.0 board)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the fan cover by Despacho3d. Made to fit the version with the GT2560 ver 4.0 MCU

Ocena
0 / 5
Polubienia
2
Pobrania
27
Wydruki
0
Wyświetlenia
211
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

MCU Fan cover for the Geeetech A10 Pro, with the GT2560 ver 4.0 MCU. Remix of the model by Despacho3d. Helps prevent print material from falling through the fan grate, possibly causing overheating and failure of the MCU. Also helps to reduce the noise of the MCU cooling fan.

Print Settings

Printer:

Geeetech A10 Pro

Rafts:

No

Supports:

No

Brim:

No

Resolution:

0.2mm

Infill:

15%

Filament:

Dream Polymers PLA

Black

Notes:

Brim shouldn't be required, although I used one for my print. I had just got a new PEO build plate and a BLTouch, had some issues with the ribs coming off during the print. Don't feel like it should be an issue if you have your bed dialed in.

Tagi