Specialized Turbo Levo eBike Charger Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It gets hot when charging and I'm not comfortable with it so let's rise it from the floor to let some air through.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 747
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Specialized Turbo Levo Charger Riser.
My Levo is the Aluminum Comp 2023, and I think all the chargers are the same.
The charger gets hot when charging and I'm not comfortable with it because floor or table gets hot too, so let's rise it from the floor to let some air through.
I printed in PLA, but I think PETG or ABS will be the materials to use, due to temperatures of the charger, PLA maybe shows deformations at mid term, maybe not I'll need to test.
Print instructions:
You need x2 “riser” and x1 “Plate” and glue together.
It “clips” at the charger.
I added some rubber feet to avoid some slip when cables move it when is it on the floor.
Print Settings:
- Both are printed in PLA
- 215C
- 65C
- 0.28 Layer height
- 20% infill
- 4 perimeters
- No supports or brim required.
Note: if anyone finds any issue let me know and I'll try to fix it.