IKEA SAMLA Spool-Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my second design of a spool holder for Samla-Boxes.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 1318
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this Spool-Holder from scratch because I wanted to have something to fit into my IKEA SAMLA boxes.
I added 500g of Silica to the bottom and it seems to keep the Humidity at around 15% in there.
To build this you will need to print the following models:
8x SAMLA-Wall
8x SAMLA-Roller
8x SAMLA-Connector1
3x SAMLA-Connector2
3x SAMLA-Connector3
No special Print-Settings needed, I printed it with my draft-settings meaning a 0.4 Nozzle, 0.3mm Layer height, 10% infill and I did not have any issues until now. Lets see how it goes in the long run.
additionally you need
6x 18mm M4
4x 10mm M4
10x Hexnut M4
8x 608 Bearing