Multiboard Hook Pin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small and strong pin that can be used in the Multiboard to hold stuff
- Ocena
- 4,938 / 5
- Polubienia
- 493
- Pobrania
- 3082
- Wydruki
- 34
- Wyświetlenia
- 9914
- Oceny
- 32
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Te used with the www.multiboard.io system
A small and strong screwable hook to be used in the Multiboard pegboard holes. The hook is printed sideways to make it very strong.
Orientation
The orientation of the hook will vary depending on how you installed your multigrid, especially for squared ones as they can be installed in any of the 4 orientations.
To find out which hook you need (for each board) just print 4 of them to test (#1, #3, #5, #7) and find out which one points up for each board :D (I have uploaded a test print for this purpose).
I put numbers on the back of each hook for printing reference, just note that the 1 is not always “up” but it's just a starting reference for the rotation.
PS: I also added a few more hooks with halfway rotation in case you need them (#2, #4, #6, #8).
 |  |