1 / 4
NRF24L01 Flipper Zero Module Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for NRF24L01 module for flipper Zero. Made in TinkerCAD
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 457
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Designed in tinkercad after taking a bunch of measurements with digital calipers. The part of the NRF24L01 with the antenna is meant to be exposed. Originally was in 4 pieces but I managed to get it down to 2.
I recommend:
- Set GPIO pins in flipper zero and hook them up to antenna per instructions (make sure to test it before affixing to case)
- Affix pins (however you choose) to bottom bracket of back side of case
- Affix antenna (however you choose) to bottom bracket of back side of case
- Affix front of case to back of case, sandwiching the pins, cabling, and antenna inside
Enjoy!
I may update this later with built in clasps or screw holes, but for now this worked. Feel free to modify it and post remixes, but please give me credit.