Parametric Drill Vacuum Adapater - Rotatable Hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the wonderful design by mkoistinen to add parameters for hose angle and rotation
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 71
- Wydruki
- 1
- Wyświetlenia
- 447
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I included a couple photos of variants I rendered showing that the updated model can handle a wider variety of shapes. The rotation_angle can go up to roughly 120deg before it overlaps the drill hole, and works in both positive and negative angles. The hose_angle can go from 1 to 120deg and needs to be a positive number.
I expect that some variants will require support, but I successfully printed at 45deg rotation with 75deg hose without support in the same orientation as the original model.
Also as a note, if you want a simple way to increase the spacing between the drill hole and the hose adapter body, the fillet_size parameter is the fastest way to achieve that without going deeper into the model
STL file attached is set for 35mm hose diameter