Parametric Drill Vacuum Adapater - Rotatable Hose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the wonderful design by mkoistinen to add parameters for hose angle and rotation
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 71
- Makes
- 1
- Views
- 447
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I included a couple photos of variants I rendered showing that the updated model can handle a wider variety of shapes. The rotation_angle can go up to roughly 120deg before it overlaps the drill hole, and works in both positive and negative angles. The hose_angle can go from 1 to 120deg and needs to be a positive number.
I expect that some variants will require support, but I successfully printed at 45deg rotation with 75deg hose without support in the same orientation as the original model.
Also as a note, if you want a simple way to increase the spacing between the drill hole and the hose adapter body, the fillet_size parameter is the fastest way to achieve that without going deeper into the model
STL file attached is set for 35mm hose diameter