Lid for Solder Flux Container with Brush Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model provides an easy to use lid for a solder flux/resin/rosin container with the added bonus of a brush holder.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 467
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The lid has three parts;
the outer threaded retaining ring which screws to the flux container.
the fixed cover part, and
the rotating cover with brush holder
A left and right handed version of the model are supplied, the difference being is the direction of rotation so that the brush rotates out of the workspace when not in use. The version in the cover photo is right handed.
A small washer and screw is required to complete the build.
The outer ring with thread was generated using Parametric Bottle Cap by FM (Printables Model 337767)
All parts are in their printed position and no support is needed