QIDI X-MAX 3 handle inlaid spool holder.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The spool bracket is changed into a handle inlaid bracket.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 251
- Wydruki
- 1
- Wyświetlenia
- 1184
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The original QIDI spool position is modified to the left handle with a spool bracket embedded in it.
The original dehumidification spool holder can be used and can also be used with other filaments.
Spool Holder layout reduced. The outlet angle is parallel to the PTFE pipe and connected to the material break detector. (The material break detector needs to be raised and turned 90 degrees).
QIDI X-MAX 3 material break detector raising bracket, model link:https://www.printables.com/model/750450-qidi-x-max-3-material-break-detector-raising-brack
Need the following:
- M3x18 x4 (M8x16 can also be used).
https://s.click.aliexpress.com/e/_oBRuvVk - QIDI X-MAX 3 material break detector raising bracket.
- 2*4mm PTFE (for 1.75mm Filment) 30 cm.
High Transparency 2x4mm PTFE Tube：
https://s.click.aliexpress.com/e/_Dn5Qfxj
5 Colors 2x4mm PTFE Tube Teflonto ：
https://s.click.aliexpress.com/e/_Eus1G3x - Mini Portable PTFE tube cutter
https://s.click.aliexpress.com/e/_onABCzC