1 / 13
QIDI X-MAX 3 handle inlaid spool holder. — image 1
1 / 13

QIDI X-MAX 3 handle inlaid spool holder.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The spool bracket is changed into a handle inlaid bracket.

Rating
5 / 5
Likes
29
Downloads
251
Makes
1
Views
1,184
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

The original QIDI spool position is modified to the left handle with a spool bracket embedded in it.
The original dehumidification spool holder can be used and can also be used with other filaments.
Spool Holder layout reduced. The outlet angle is parallel to the PTFE pipe and connected to the material break detector. (The material break detector needs to be raised and turned 90 degrees).


QIDI X-MAX 3 material break detector raising bracket, model link:https://www.printables.com/model/750450-qidi-x-max-3-material-break-detector-raising-brack

Need the following:

  1.  M3x18 x4 (M8x16 can also be used).
    https://s.click.aliexpress.com/e/_oBRuvVk
  2. QIDI X-MAX 3 material break detector raising bracket.
  3. 2*4mm PTFE (for 1.75mm Filment) 30 cm.
    High Transparency  2x4mm PTFE Tube:
    https://s.click.aliexpress.com/e/_Dn5Qfxj
    5 Colors 2x4mm PTFE Tube Teflonto :
    https://s.click.aliexpress.com/e/_Eus1G3x
  4. Mini Portable PTFE tube cutter
    https://s.click.aliexpress.com/e/_onABCzC