1 / 1
Adapter to connect a thread G1/2" to a water tap M24x1 — zdjęcie 1

Adapter to connect a thread G1/2" to a water tap M24x1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

To connect a hose with a thread G1/2" to the water tap, I have designed this adapter.

Ocena
0 / 5
Polubienia
17
Pobrania
233
Wydruki
0
Wyświetlenia
1029
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The adapter is designed to connect a thread G1/2" to a water tap M24x1. On the bottom of the thread G1/2" a sealing edge is added to get a water tight connection without using an additional sealing. Size of hexagon fit for a tool with 27mm.

Print instruction:
  • material:           PETG
  • layer height:     0,2mm
  • nozzle:              0,6mm (0,4mm)
  • support:            no
  • enclosure:         not required

 

Tagi