1 / 2
Desk Saver with Measurements and Attachement Points Work Tray Solder Catch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made to be able to isolate solder, gluing, paint to keep desk nice.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 574
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
Made this for General Project surface Use to solder on, Glue On, Paint On then reprint once warn out. Basically a work surface to protect my desk. I included pre-threaded attachment points, a rim to keep screws from rolling off. But, I included a ramp so you can easily grab and slide parts off to the right. Has a hangy hole and various hooks and holes to help with wiring and holding parts.
Thanks to: @LucianoRovanni_5726 for his Ruler design I incorporated in the tray.
https://www.printables.com/model/1677-ruler-15cm