Nozzle Z Offset Search - Prusa MK3S+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Test squares that vary in Z from -0.05 mm to +0.05 mm to fine tune a printer nozzle's Z offset.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 191
- Wydruki
- 0
- Wyświetlenia
- 739
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
The origin is from @Maxim7745_280394
This is a test print to help fine tune a printer nozzle's Z offset. It prints squares that range from -0.05 mm to +0.05 mm in height. See picture for the square layout.
All gcode files are meant for Prusa PETG and uses the default PETG profil. Gcode for 0.4 mm nozzles has been provided. I can add other options upon request.
If you do create a test pattern for your specific firmware, please post it as a remix from the origin so others can find and use it too. Thanks!
Before using this, make sure your nozzle's height has been approximately dialed in. Otherwise, in theory it could hit the bed if your nozzle is set much too low. Additionally, it is presumed that your printer's ABL has been set up properly so the minor Z offsets will be useful for refining the nozzle height.