Vision Pro Battery packs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New to CAD made a few different versions of a Vision battery pack. let me know how I can improve. Thanks
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 831
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
**Updated with more stable design
Hey All.
New to CAD decided to make some battery pack options for the Vision Pro.
minipack- just a belt clip for the normal Vision Pro battery pack
MegaPack - a larger version that can hold most newer ANKER battery the one I made it for was the (Anker PowerCore III Elite 25600 mah 87W USB-C PD) I found that this battery was best for charging the Vision Pro while in use.
Mega-pack combo - I also made a hybrid of the two for the insane individuals out there or if you don't have pockets. NGL its a little bulky and heavy but I promise you won't have to worry about battery life.
PRINTING INSTRUCTIONS- best to print standing upright just like the model is in the file, also use 3 walls if you can. Supports are necessary, use normal supports as organic doesn't work well. I also printed ant 250/ms and it came out fine.
let me know were and how I can improve. Thanks again