Organizer for a set of 1/2" socket wrenches.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an organizer/case for a set of 1/2" sockets from numbers 6 to 32 with a rotating handle.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
his is an organizer/case for a set of 1/2" sockets from numbers 6 to 32 (I couldn't find sockets 6 and 7 for the 1/2" handle, I used a 1/4" reduction). The handle can be rotated in two ways (by 90 degrees). sides so that it takes up less space. The handle is made of a 19 mm tube (for window curtain rods). I divided the organizer into 6 parts for easier printing on small printers. I connected everything with 8 mm dowels and glued it with two-component glue. Standards needed: M6*25 mm screw,
M6 nut, M10*40mm screw, M10 spring washers, M8*16 mm ball-setting screw - 2 pcs each and 8*30mm dowels - 16 pcs (I used wooden furniture dowels).
I printed with PLA (I changed the color in the middle of the print) with 10% infill, no supports are needed.