1 / 2
Vinyl Record Dividers with MESH body (Thinner and Larger Notch) — zdjęcie 1
1 / 2

Vinyl Record Dividers with MESH body (Thinner and Larger Notch)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Thinner dividers with larger notches for use with Ikea Kallax Spacer Vinyl with Protective Film by David_p1p.

Ocena
5 / 5
Polubienia
27
Pobrania
213
Wydruki
3
Wyświetlenia
1112
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

Simple remix. I thinned them out and added a bit to the notch. I needed to extend the tab because I also use the following spacers in my Kallax: https://www.printables.com/model/469429-ikea-kallax-spacer-vinyl-with-protective-film

The models are “per-plate” since that was how I modified them. It should be easy enough to split as objects within Prusa Slicer if you only want to print a few letters or have a smaller print bed.

I printed at .1 layer height to be able to get the .5mm thickness I wanted.

Tagi