1 / 2
Vinyl Record Dividers with MESH body (Thinner and Larger Notch)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thinner dividers with larger notches for use with Ikea Kallax Spacer Vinyl with Protective Film by David_p1p.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 212
- Makes
- 3
- Views
- 1,107
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Simple remix. I thinned them out and added a bit to the notch. I needed to extend the tab because I also use the following spacers in my Kallax: https://www.printables.com/model/469429-ikea-kallax-spacer-vinyl-with-protective-film
The models are “per-plate” since that was how I modified them. It should be easy enough to split as objects within Prusa Slicer if you only want to print a few letters or have a smaller print bed.
I printed at .1 layer height to be able to get the .5mm thickness I wanted.