1 / 2
58 mm Portafilter Espresso Holder for Gaggia Classic Pro
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 58 mm portafilter holder for the Gaggia Classic Pro that prints with no supports for double tape
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 143
- Wydruki
- 0
- Wyświetlenia
- 918
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (34)Powiązane
This is a 58 mm portafilter holder for the Gaggia Classic Pro that prints with no supports and is meant to be adhered to a wall or cabinet using double sided tape.
This model is very simple (it is symmetrical) and may work for other portafilter brands. The attractiveness of this model is that it is simple and it prints with no supports.
Print Parameters:
- Tested materials: PETG and PLA (model in picture is meatllic blue PLA).
- Layer height: Works with 0.2mm, adaptive layers may yield smoother surface.
- Walls and top/bottom layers: The print in the picture used 3 layers for walls, top and bottom.
- Infill: The print in the picture used 10% 3d honeycomb (less weight helps because the portafilter is pretty heavy).
- Build plate: A textured PEI plate may let you print without brims, the one in the picture was printed without brims (no supports either).
