Orbiter Bear Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount for the Orbiter based on the BearExxa extruder.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 138
- Wydruki
- 0
- Wyświetlenia
- 1620
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Update 7/24/2024: I've uploaded STEP files for the v6 variant with BLTouch and PINDA
I've updated the mount so you could use a BLTouch as well for a Volcano HE or a V6 HE.
UPDATE 8/18/2021: I purchased a Orbiter V1.5 and adjusted the mount to fit (mounting holes were slightly different). Also you will have to cut a new length of PTFE tubing to 54.50mm to work with this version. I've now included a tool for cutting the PTFE tube to the correct lengths for each version.
I recently purchased an Orbiter Extruder kit and needed a mount for it. I currently use the BearExxa on my Bear Clone and I didn't want to really change too much from that design as it make things easy to disassemble when needing to change parts.
So I came up with this simple mount for the Orbiter. The mount is a remix of the BearExxa Body and mounts to the original Bear x-carriage. Unfortunately you will lose the Filament sensor (I'd really like to redesign the body to where I could include this).
For the PTFE tube you will have to cut it down to 40mm for it to work with this mount.
Print Settings
Printer:
Prusa Bear Clone
Rafts:
No
Supports:
No
Resolution:
0.28mm
Infill:
20%
Filament: Priline Carbon Fiber PC Black
Notes:
I used Greg's print parameters (4 perimeters, 5 top and bottom, 20% infill), I only changed the layer height as I'm using a 0.6mm Volcano Nozzle
Category: 3D Printer Extruders