1 / 2
Hook for IKEA Nordkisa — zdjęcie 1
1 / 2

Hook for IKEA Nordkisa

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hook to be snapped on to the side of the IKEA Nordkisa wardrobe - eg. to hold a backpack or a cap.

Ocena
0 / 5
Polubienia
5
Pobrania
23
Wydruki
0
Wyświetlenia
109
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

For when you need to hook for example your backpack on an IKEA Nordkisa (004.394.68) wardrobe. This is a snap-on design to be put on the horizontal piece of wood from the right side which prevents sliding off the hook when retrieving the item. It can be taken off just by applying a bit of pressure to the latch. 

Total length 70 mm, hook radius 20 mm.


Recommended material: PETG (PLA might break when snapping on/off)

Recommended settings: 3 walls, print flat down

 

Do you want to buy this item printed? 

Have a look on our e-shop with EU shipping: https://3dmarketplace.cz/cs/doplnky-a-dekorace/167-hacek-pro-ikea-nordkisa.html

 

This model is for non-commercial usage only. If you want to use this model for commercial purposes, send us an e-mail.

Tagi