Socket Holder for Icon Mini Ratchet (Meme Tool)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print to hold 8-13mm sockets (or 7-13mm minus the 9mm) with the Icon Mini Ratchet
- Ocena
- 0 / 5
- Polubienia
- 62
- Pobrania
- 240
- Wydruki
- 1
- Wyświetlenia
- 2870
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Icon Mini Ratchet - https://www.harborfreight.com/locking-flex-head-ratchet-and-bit-set-35-piece-58074.html?_br_psugg_q=icon
Wanted a way to attach the most common metric sockets I would typically use for light duty projects.
Inspired by @PricFlair_1707022's bit holder, I designed my own to hold 8, 9, 10, 11, 12, and 13mm sockets I pulled from a random set I had (PowerTorque happens to be the ones I have). One side is designed to be taken on and off for access. Still might tweak it a bit, not quite sure yet.
IMPORTANT NOTES - Make sure to mirror part 2 in your slicer or else both parts will not fit up to each other.
UPDATE - Added a “Corrected” part 2 STL so you don't have to reverse it in your slicer. Additionally, I added another Part 2 STL with labeling for 7, 8, 10, 11, 12, 13mm.