Extruder Idler Wheel for Prusa MINI+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,21 € – 0,25 € netto (bez VAT)
Dla pliku: mini_extruder_idler_wheel_0.1mm_PLA_MINI_19m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,23 € netto (środek widełek).
- Masa podana przez autora
- 1 g
- Czas druku podany przez autora
- 19,2 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Idler wheel for the Extruder on the Prusa MINI+
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 1374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
When receiving the pre-assembled version of the Mini+, it turned out that the extruder was missing the idler wheel. Printing was possible, probably thanks to the friction the filament has just touching the extruder gear, but most of the time the extruder had difficulties loading and unloading filament as well as under-extruding.
While waiting for the missing parts from Prusa I printed them in PLA just to see if it was possible. It worked.
Modeled in Tinkercad: the wheel is 5x16 mm and the shaft/pin is 5x12 mm.