1 / 2
Extruder Idler Wheel for Prusa MINI+ — image 1
1 / 2

Extruder Idler Wheel for Prusa MINI+

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.21 – €0.25 net (excluding VAT)

For file: mini_extruder_idler_wheel_0.1mm_PLA_MINI_19m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.23 excluding VAT (range midpoint).

Weight reported by the author
1 g
Print time reported by the author
19.2 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Idler wheel for the Extruder on the Prusa MINI+

Rating
0 / 5
Likes
9
Downloads
42
Makes
0
Views
1,374
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

When receiving the pre-assembled version of the Mini+, it turned out that the extruder was missing the idler wheel. Printing was possible, probably thanks to the friction the filament has just touching the extruder gear, but most of the time the extruder had difficulties loading and unloading filament as well as under-extruding.

While waiting for the missing parts from Prusa I printed them in PLA just to see if it was possible. It worked.

Modeled in Tinkercad: the wheel is 5x16 mm and the shaft/pin is 5x12 mm.

Tags