Filament Dust Filter/Wiper MK4/MK4S/MK3.9/MK3.9S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiny Filament Dust Filter/Wiper for MK4 Nextruder
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 143
- Wydruki
- 2
- Wyświetlenia
- 1502
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
The dust is wiped off the filament by a fabric inserted in the shell.
The filter is composed of two parts that will need to be glued together. Print the thread with a 0.1mm layer. The shell can be printed with a 0.2mm layer. To assemble you will need two 5x2mm round magnets (can be taller) and a piece of fabric that you insert into both halves of the shell. As a fabric, I recommend using something that doesn't tear or lose fibers. For example, a piece of sterile gauze. Avoid using cotton wool, which can cause clogging of the nozzle.
Assemble: Screw the thread into the Nextruder and mark left side with a marker. Unscrew the part and glue it to the shell so that the mark is pointing towards back of the box. Allow to air well and cure if you used instant glue. The vapors may damage the Nextruder.