Round Benchdogs for MFT or Workbench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple benchdogs at a range of working lengths - 15, 18, 20, 30, 40, 60mm
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple benchdogs at a range of working lengths - 15, 18, 20, 30, 40 and 60mm
*Note: I rely on feedback and people listing their makes to get points for filament etc. Please comment if you like my designs or want a variation :D
Designed on presumption of calibrated printer producing dimensionally accurate parts.
You may need to finely sand or add a little wax for an easier fit in your table.
Will fit 20mm hole with 20mm+ depth.
Print and use as is, or insert M8 or 5/16" rod (or bolt) to increase strength.
Print upside down with no supports.
I use PLA+ and 0.3mm layer height on 0.4mm Nozzle.
3 walls for strength and durability to maintain accuracy, and 30% infil.
If you need to withstand a lot of clamping force - use more walls and infil with a rod… use stronger filament or maybe buy metal depending on the forces you are using.