1 / 7
Shifter Adapter for 12v Peg Perego, RZR 900, John Deere Kids Ride On Car — zdjęcie 1
1 / 7

Shifter Adapter for 12v Peg Perego, RZR 900, John Deere Kids Ride On Car

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shifter adapter for popular kids 12v electric ride on cars such as Peg Perego, RZR 900, John Deere, etc.

Ocena
0 / 5
Polubienia
4
Pobrania
27
Wydruki
0
Wyświetlenia
1119
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Share Alike

My first design ever—aka the one that started it all!   

This adapter fits the shifter on many popular kids 12v electric cars such as Peg Perego, RZR 900, John Deere, etc.  I tried, and failed, to epoxy glue the original back together.   

The print in my picture is quite rough, but it has held up longer than the original.  I was brand new to both designing and 3D printing, and it was printed on a new Creality before it was dialed in.  This saved me from buying the entire $30 assembly, so hopefully it can help someone else too! 

Designed in Tinkercad.

Print instructions/settings

I printed this standing up, with build plate only supports, however I would consider printing either upside down for easier support removal or sideways for better strength.  Do not recommend PLA as it is too brittle and may not hold up well outdoors.

Nozzle: 

0.40mm 

Rafts: 

No 

Supports: 

Build plate only 

Resolution: 

0.20mm

Infill: 

100 

Filament: 

PETG 

Original Part:

https://www.amazon.com/Shifter-Tractor-Polaris-Replacement-Children/dp/B0857H519M

Tagi