mecha simpit pannels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
just a housing for switches and things to be used when building a sim rig for mecha/aircraft.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 1082
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
just a housing for switches and things to be used when building a sim rig for mecha/aircraft.
starter code here: https://github.com/Amyharrison93/stream-deck
i used a Leonardo for the first controller i would recommend using one per block to make them easier to configure and reconfigure. I will be updating the code as i go with my own version of this but right now its only good for 12 buttons and 4 sliders.
Update: I changed the throttle bay to fit the throttle better and also account for the wires. expanded the bottom holes on the face plate to fit some bigger switches. got rid of some of the holes so that the encoders fit more reliably and are accessible and added space for a screen 1602A
update: added some more faceplates and a specific mechwarriour one for the throttle side
update: added a better housing for the electronics and also added a blank faceplate in case you want to add your own buttons and holes and things
Category: 3D Printing