Piston-Conrod complete assembly with roller bearing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made to be more effective material waste wise, but the final assembly is made like in a real engine.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 494
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Standard Digital File License
For easy print use pre-sliced 3mfs.
The rollers, cages and piston rings requires a 0.25 nozzle and the bearing assembly at least PET-g as a material (Assy_0.25_nozzle.3mf). The rest of the assembly should print fine with a 0.2 mm layer height from a 0.4 mm nozzle (Assy_0.4_nozzle.3mf).
The piston has special enforcers (enforcers_Piston.stl) and togheter with the conrod cap need supports on the base plate.
For the stability of the piston pin during printing, a raft it's needed and the extra layers cut after. Two 3Ds are provided (like a real one looking or a full bar for adding hexagons in slicer.
For easy print use pre-sliced 3mfs.
For more information about post-printing process a PDF with instructions it's provided.