Sponge Holder with optional sink
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sponge Holder with optional sink
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a sponge holder for the kitchen. No more wet sponges laying around!
It is inteded to be hooked at a kitchen bar near the sink.
There are two versions, one with sink, and one without.
Print 2 hook, 1 holder and 1 tub. Then slide the tub into the holder and hang it at your kitchen bar, that is it! If you want to clean the holder or empty the tub, you can take it apart easily.
Print Option without sink:
Bambu PLA
15% infill
print it on the side as shown on the screenshot.
no supports needed
Print Option with sink:
Bambu PLA
15% infill
print it on the side as shown on the screenshot.
support needed at the big hole (recommend support filament for smoother surface)
If you have any questions, feel free to ask.