KNOMI2 Kirigami Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to fit the KNOMI2. I also replaced the nuts with heat set inserts
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 82
- Wydruki
- 2
- Wyświetlenia
- 872
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
UPDATE: I noticed the Dragonburner was hitting the screen just slightly when at Y0. I added a little cutout to prevent that. I haven't printed this one yet as I like K Millers remix and may try that instead.
Beware: the KNOMI 2 is 5v Only. You have been warned. Don't fry it by sending 24v to it.
I remixed this design to work with the KNOMI 2 screen which is bigger.
I had to make the hole bigger and change the way it is held in place.
I also made it more symmetrical and added some bulk.
4x M3x8 BHCS
4x M3 x 5 x 4 mm heat set insert (Voron standard)
Installs just like the original just insert your heat sets rather than using nuts. The bar has a cutout for the connector to line things up.