Ender 3 pro nozzle brush mount (compliance mechanism)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nozzle brush holder with a compliance mechanism to clean the nozzle gently.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 119
- Wydruki
- 2
- Wyświetlenia
- 1412
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I originally designed the BLUE one as I have installed the hand-screw wheel on the X plate. Then, I made the Red one for normal ender 3 pro, but its compliance may be limited by the hand-screw wheel
No additional hardware is needed to install this mod (except the brush). Compliance design enhanced the longevity of the nozzle life.
20240208: I realize some PEI sheet has handles at the corners, so I have made one more version that has a logner brush mount so you can mount the brush closer to the centerline.
this is the hotend I am using, u may need to modify the brush location for other hotend: https://www.creativity3dprinter.com/ExtruderKit_CoolingFan_MK8DirectDrive?search=direct%20drive%20ender&category_id=0
Please see the video below in action.
original design is mounting at the end of x-axle https://www.printables.com/model/391282-ender-3-pro-nozzle-cleaner-for-creativity-direct-d
######################################################################
# Clean Nozzle
# my brush location is at X=190-225 Y=-15 Z=-4
######################################################################[gcode_macro CLEAN_NOZZLE]
description: Heat and clean nozzle
gcode:
G28
G1 Z15 ; raise nozzle
M109 S200 ; wipe temp
M117 Wiping Nozzle... ; progress indicator message on LCD
G1 E-10 F100 ; retract 10mm of filament
G1 X180 Y-15 F3000 ; move above wiper pad
G1 Z-4 ; push nozzle into wiper
G1 X225 Y-15 F1000 ; slow wipe
G1 X190 Y-15 F1000 ; slow wipe
G1 X225 Y-15 F1000 ; slow wipe
G1 X190 Y-15 F1000 ; slow wipe
G1 X225 Y-15 F2000 ; slow wipe
G1 X190 Y-15 F2000 ; slow wipe
G1 X225 Y-15 F2000 ; fast wipe
G1 X190 Y-15 F2000 ; fast wipe
G1 X225 Y-15 F4000 ; fast wipe
G1 X190 Y-15 F4000 ; fast wipe
G1 X225 Y-15 F4000 ; fast wipe
G1 X190 Y-15 F4000 ; fast wipe
G1 X225 Y-15 F4000 ; fast wipe
G1 X190 Y-15 F4000 ; fast wipe
G1 X225 Y-15 F4000 ; fast wipe
G1 X190 Y-15 F2000 ; fast wipe
G1 X225 Y-15 F2000 ; fast wipe
G1 X190 Y-15 F1000 ; slow wipe
G1 X180 Y-15 F1000 ; slow wipe (and wipeout)
G1 Z15 ; raise extruder
G1 E10 F100 ; move filament back
M109 S0 ; set extruder temp to 0
M117 Nozzle Cleaned.. ; LCD message
G28 ; home XYZ
M117 Ready... ; LCD message