Micromesh drying and storage box for 15 pieces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A micromesh storage box that's airy enough for drying them also. Air slots in the bottom, back lean, and lid.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 308
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently bought a set of micromesh pads for turning pens, and whilst I found a lot of very nice models for different types of racks, I couldn't find one that would be good for both drying and storing them, so I had to design my own. This one holds 15 pads, it has slat for water to escape in the bottom, and the “walls” that the pads lean on at 30 degrees, also are slightly grooved to allow water to pass. The lid has big holes on the sides, not on the top, in the hopes that it wouldn't catch so much dust that falls on it in the shop.
If you like the model, please post a make, and if you love it, please consider a small tip or buying your next set using an affiliate link of mine for your micromesh pads:
UK Seller: https://ebay.us/14Lkfw
German Seller: https://ebay.us/iGkLmp
US Seller: https://ebay.us/aM8I3F