GPS & VTx antenna TPU for AOS UL7
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tail TPU unit to hold a Matek GNSS/Compass M10Q-5883 and SMA bulkhead for a VTx antenna.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This two piece TPU print holds a Matek M10Q-5883 GNSS (GPS)/Magnetometer (Compass) and a SMA antenna bulkhead for a single VTx antenna for a AOS UL7 FPV drone.
Both pieces are printed without supports using eSUN 1.75mm TPU 95A Flexible 3D Printer Filament. The AOS_UL7-GPS_TPU.3mf file includes the pause command for inserting the plastic nuts.
Plastic bolts and nuts used to minimize interference with the GNSS/Compass unit.
Material used:
- IPEX or U.FL to SMA or RP-SMA Female Bulkhead Mount. Verify the appropriate connectors for your antenna and VTx unit; example IPEX to RP-SMA Female Bulkhead Mount RG178.
- 2 x M3 20mm plastic bolts eg. M3 Nylon Hex Spacer Standoff Kit.
- Matek M10Q-5883
- eSUN 1.75mm TPU 95A Flexible 3D Printer Filament
NOTE: Never power-up the VTx unit without the antenna attached to the SMA bulkhead otherwise it's very likely to damage the VTx.
Enjoy!