BentoBrain - A BentoBox Automation Solution
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Give it a brain! Add an ESP32 and make the fans turn on and off using Nozzle Temperature as a parameter.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 1015
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for a solution to automate the use of the BentoBox v2. I decided to use the nozzle temperature as a parameter since i could differentiate between OFF, PLA, and ABS/ASA/NYLON based on temperature. Currently i run it during any print, including PLA.
The entire BentoBox is powered by a single USB-C cable that connects directly to the ESP32 board. You can sneak a USB cable through the cracks in the printer or build a buck converter inside the printer and hide it.
To build the automation i added a tiny ESP32 processor between the 4020 fans. I used this chip:
https://www.amazon.com/gp/product/B0BYSB66S5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
To keep things tiny, i needed 5v fans so i didn't have to use a buck converter inside the BentoBox. I also didn't want to run both 5v and 12/24v to the box. I used these Fans:
https://www.amazon.com/gp/product/B07WCZ9ZL4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
The code can be obtained in my Github. I welcome all modifications and upgrades!
App Code:
GitHub - apadua/BentoBrain: BentoBox v2 control via ESP32 and PWM fans
Because this is running by subscribing to the printer's MQTT events, a million enhancements are possible. If you look at my code you'll see it works but also it will be vary obvious that i'm not a developer - i hacked it until it worked.