1 / 1
5mm Spacer for Voron 60mm Skirt Fans
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by Noctua. These spacers will lower the noise level of the electronics bay fans.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 116
- Wydruki
- 2
- Wyświetlenia
- 410
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (15)Powiązane
Noctua came out with a inlet spacer that can improve both noise and airflow by creating a space between the grill and the fan. The spacer has the same CAD dimensions as the fan grills and is 5mm thick like the Noctua spacers. Works with any 60mm fan.
Note: The space helps with can noise from the blades passing the covers. The spacer may help with motor noise if printed from TPU.
Installation:
It goes between the fan and the fan grill. You will need longer screws