1 / 4
Nibe F470 filter holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Nibe F470 exhaust air heat pump filter holder for self-cut filters. Holds the filter in place and prevents bypass leaks.
Edit: Added a third model. This is a one piece model with slots that lock the holder in place. It is also a bit thinner (2 mm vs 3 mm). I recommend organic supports on build plate for the slots.
3 versions included:
1 piece version:
- for printers having at least 180x190mm print volume
4 piece version:
- for printers with smaller print volume
- assembly with 3 mm screws/bolts
+ the version I wrote the edit on top
I used PETG with 0% infill.