Wyze 47 mm Watch charging stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have seen a few of these and printed some of them, they are to light. The stand falls over with weight of the watch.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 118
- Wydruki
- 2
- Wyświetlenia
- 692
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
I have seen a few of these and printed some of them, they are to light. The stand falls over with weight of the watch. So, I made my own it takes 28 pennies to counter the weight of the watch works well made a few. updated files you now can glue it all together and then add the cable.
Printed in PLA, .60 nozzle
PrusaSlicer 3 Perimeters, 15% infill, supports: build plate only
Tight tolerances so not have to use glue; you may need to trim some.
28 Pennies (US or Canadian) I used hot glue to keep them from making noise.