1476 modeli
*I thought the MK3/4 were 250mm in height similar to most other printers in that size category, I will be working to add a version that fits the 210mm height build volume of those printers Scaled down to fit the bed of a standard 250mm…
Model description The 747-400 is a wide-body airliner, an advanced variant of the initial 747. The first 747-400 was rolled out on January 26, 1988, and made its maiden flight on April 29, 1988. It typically accommodates 416 passengers in…
This is a AK47 that I made for Dummy 13 with more detail tha existing models. It has two versions, one with a stock and one without. Please post your makes, I like to see them + you get prusameters. Print on .1 layer hight with supports…
Model description The Boeing 747-8 is a wide-body airliner developed by Boeing Commercial Airplanes, and the largest variant of the 747. After introducing the 747-400, Boeing considered larger 747 versions as alternatives to the Airbus…
Model description The Boeing 747SP (Special Performance) is a four-engined long-range widebody airliner with a maximum capacity of 313 passengers in a partial double deck configuration produced by the American aircraft manufacturer…
Mark 46/47 helmet Full suit is now available at my shop. Link below 1.-Sizing - The Helmet may need to be sized for your needs, as it is roughly sized to fit a Average male I recommend using my FREE Heads for Sizing here -----…
The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame The bolts are to scale as far as possible. When the screws get too long for the label, the bolt figure…
Model description The Boeing 747-100, which was launched in 1966, was the original variant of the Boeing 747. Compared to later versions of the 747, the early Boeing 747-100s only had three windows per side on its upper deck. However,…
Intended to be used in the Formd T1 case in 3 slot configuration with the air cooling holy trinity: Thermalright AXP-x47 Full Copper Noctua NF-A9x14 Noctua NA-FD1 The pegs are designed to be friction fit and clear the fan retainer clips.…
★·.··.·★ 👋 Hello😁 ★·.··.·★ Before reading the description I recommend in the future to look at the collections created by me for better service for high projects is to distinguish them better 💚MAKERWORLD→ COLLECTIONS Lego Technic Police…
Collection of screws (ISO 4762 / DIN 912) including : M3x 6, 8, 10, 12, 16, 20, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
Made the AK-47 using the grip from the pistol. Print at 0.05mm layer height and use supports.
The Boeing 747. Iconic, beautiful, revolutionary. The 747-8 is the latest and most likely final revision of the "Jumbo Jet". This is my 3D printable rendition. 60 Versions, 8 months of on and off work, and many many hours of my inner…
AK-47 Geometric Wall Art Inspired by my favorite game CS2
This model is compatible with the lego system.
This model is compatible with the lego system.
AK47-Kalashnikov - Автомат Калашникова образца 1947 года This is a AK47 keychain. It is easy to print It has details (there could be more, but I think it's enough for a keychain). no supports looks really nice How I printed it: PLA 0.1…
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
Modeled using Fusion 360 The 747 is one of my favorite aircraft, and I decided to model this variant because it was the first one produced.
A compact AK-47 inspired bolt-action pocket rifle , designed as a functional and fun fidget model. This version brings a modern AK platform look into the pocket format, with clean lines, modular compatibility, and smooth bolt-action…
Self inking stamp (47x18) (same ink pad as trodat 4912). here is video www.instagram.com/p/CMf8UjKhHci/ what you need: ink pad (47x18 - for 4912 stamps) laser engraved rubber (or you can try printer stamp design with TPU) some spring for…
Collection of screws (ISO 4762 / DIN 912) including : M2.5x 3, 4, 6, 8, 12, 16, 20, 25, 30, 35 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. This part is quite tiny, consider…
I found this model on cults3d from SLAVCHIK and remixed it with removal of the lowest layer to create a smaller more manageable print. If you need more storage consider downloading the original file. Happy printing!
This is the goldilocks ornament, not too big, not too small, but just right. It is 9-sided or Nonagonal, so looks really nice. It is 110 mm from the very top of to the bottom, and about 47mm at the widest point. I found many ornaments to…
This model is compatible with the lego system.
Глушитель на АК47 и остальные модели на дульную насадку, без резьбы. Печатается без поддержек. Category: Sport & Outdoors
Assembly Guide: TIP, Make Sure The Screw On The Blaster Is Tight Print Settings: Try and use the .3mf file instead of just the .stl, there are a lot of setting changes! Setting Changes (for .stl): Ironing, all top surfaces (FOR AK47_1…
A big thanks to Richie Rakete for taking on my model and splitting it up for easy printing. Richie emailed these files mid last year and I thought he was going to post them. I had since forgotten about this model but thought its well…
Boeing CH-47 Chinook The Boeing CH-47 Chinook is an American twin-engined, tandem rotor, heavy-lift helicopter developed by American rotorcraft company Vertol and manufactured by Boeing Vertol. The work had begun in 1957 en had it's first…
This model is compatible with the lego system.
Moteurs DYS 1306, 3100 kV (2x) Contrôleur de vitesse DYS 10A (2x) Servomoteur Hextronik HXT500 (4x) Destinataire Batterie LiPo 3S J'ai imprimé presque toutes les pièces avec une seule coque et environ 5% de remplissage Le poids total au…
It's a 0.15" hole, meant for a screw bushing I also added just the rail, [so that people could add the railing to their existing dust covers. It is a 0.15" hole with a 0.25"(width)x0.1"(depth) bore head] and just the dust cover
I designed this model to squeeze a bit more performance out of the Thermalright AXP90-x47 CPU cooler in the FormD T1 v2 case. The duct prevents re-circulation and ingestion of hot air into the cooler and can provide some passive cooling…
A remix of "Galaxy Watch 5 Active Charging Stand" to fit the 47mm model of the Galaxy Watch 6 Classic. I printed it with 100% infill to give it some proper weight :)
This model is compatible with the lego system.
This model is compatible with the lego system.
updated Version here : https://www.printables.com/model/1208363-akm-ak-47-1030-round-magazine-v2-ar-15-spring-comp This is a 3d printable Magazine for the AK 47 and AKM pattern rifles. Included are models for a 10 rnd version which has…
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
This model is compatible with the lego system.
A springy plane mainly based on Boeing 747 (much simplified) May be hard to print but it's worth it :) --- Video with a plane https://www.instagram.com/p/DQY6_uKjVYo/ More Flexi models:…
I never uploaded this model because I edited it quite badly but it fits.
Helps to prevent hot air from recirculating into the CPU cooler fan. The internal chamber of my case get very hot, even with a 120mm exhaust fan installed. On my Terra, it reduces CPU temperatures by upwards of 13C. Before installing this…
Collection of screws (ISO 4762 / DIN 912) including : M4x 6, 8, 10, 12, 16, 20, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [UPDATED Dec 21, 2023] updated the battery removal area as @Runboy suggested, so…
Collection of screws (ISO 4762 / DIN 912) including : M5x 6, 8, 10, 12, 16, 20, 25, 30, 35 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
This is a Feather remix by : PATRICK_87 - https://cults3d.com/en/3d-model/game/knight-helmet-lego-human-size For Projects Pirate Hat and Lego Skeleton by : @MekCreate -…
This model is compatible with the lego system.
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
1:200 Desk Model of the Boeing 747-8i. The .3MF file contains the parts for the print.
Endkappen für VELUX 948474 Insektenschutz Rollo ZIL passend für Insektenschutzrollo ab Januar 2003 (AN 01) Ein Set im Original kostet ~25€ + ~10€ Seil am besten mit dem Runden Teil nach oben drucken + überall Support Mit guten PLA sollte…
Since none of the original adapters fitted my needs, i designed my own. It has an adapter ring with 147,5 mm diameter Printing Just flat on the build plate, no supports needed Assembly 5 x M6 nut 5 x M6x16 Bolt (longer, if you have a…
This is a Feather remix by : PATRICK_87 - https://cults3d.com/en/3d-model/game/knight-helmet-lego-human-size For Projects Pirate Hat and Lego Skeleton by : @evanphi - https://www.printables.com/pl/model/149408-minifigbigfig-tricorn-hat…
Please click if you appreciate my work :) AK47 Bullet 7.62x39 mm 3part and 1part model Commercial License >> cults3d.com/:2847465
How to print. For engine use recommended ASA or ABS any other high heat resist material. Might get away with PET since its off on top of the motor. (still it is your throttle body, be responsible) And test test test. Make sure when you…
This is a nice little desk stand for the receiver. It includes a baffle to reflect the sound from the rear speak forward and a resonating chamber that slightly amplifies it. The TPU foot is optional and should be printed in TPU 95a. It…
Indian Chief year 1947 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA
A fancy charging stand for the Samsung Galaxy Watch 6 Classic 47mm! It might work for other versions or watches as well, but I didn't test that! The diameter of the charger-hole is 29.5mm I added a piece of 1mm thick sticky foam where the…
Metric socket head cap screws M6 with hexagon socket (DIN EN ISO 4762). Lengths 10, 12, 16, 20, 25, 30, 35, 40, 45, 50, 55 and 60 millimetres. The hexagon socket is slightly modified so that bits, screwdrivers etc. fit better. Metrische…
I was struggling charging my watches and still be able to see / operate them. So I made this stand wich fits the original charging cable (slightly pressed in) - please check attached model dimensions to verify you have the same plug on…
Dyson Mini Turbo 967479-01 96747901 belt housing part T112750 supports needed This part was broken when the mini turbo brush of my Dyson V9 started to rattle I printed it in PLA and after a year it is still going strong Category:…
In honour of Pokemon Go's Swinub Community Day (February 16th) I have knocked up a Mamoswine one piece model Definately needs supports! Print instructions Category: Video Games
This model is compatible with the lego system.
Small wallart verison of legendary Boeing 747. Including raw .stl file in orginal scale (aprox. 1,5m long)
Introduction: One piece Sukhoi Su-47 Berkut multicolor supersonic jet fighter. One of the most famous aeroplanes with “backward wings”. I am a fan of the Ace Combat series and this was one of my favourites growing up :) Credits: Thanks to…
Collection of screws (ISO 4762 / DIN 912) including : M6x 6, 8, 12, 16, 20, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
This is the Angled Foregrip that fits perfectly on the Lower for my model of the Handguard, could fit other weapons but probably going to look “bad” cause of the curve that it follows. Enjoy. Solid files included.…
The cheap molded case that comes with these wrenches was way too big and bulky, so I made my own! I've caught the gridfinity bug, so I naturally made a version to be compatible with it. I use the 3x5 version, but I also uploaded a 4x5,…
class 47 for model railway railroad model train
This model is compatible with the lego system.
30 RND - ISH, I HAVE NOT CONFIRMED I AM GOING TO ADD 20 A RND MAGAZINE, IF I CAN FIND MY REAL ONE (HEHEHE). I HAVE ALSO ADDED A VERSION WHERE YOU CAN BOLT IT TOGETHER SO YOU WONT HAVE TO TRY TO CLEAN OUT ALL THE SUPPORTS FROM THE PRINT.…
This model is compatible with the lego system.
We created a differential swerve drive for our 2022-23 Power Play robot. This is the pod design we created for our robot. The differential swerve pod was designed to be mounted to a drivetrain using 40mm needle bearings and a 1/4" Hex Cap…
AK-47 - wall art - keychain Scale it to your needs Happy printing!
This model is compatible with the lego system.
Well known czech railway vehicle
This model is compatible with the lego system.
Collection of screws (ISO 4762 / DIN 912) including : M8x 8, 12, 16, 20, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
This is a simple mount for the OV5647 style IR-Cut Cameras that mounts to the Articulating Mount by Sneaks. It has cutouts for 9mm heatsinks, as seen being used for the Raspberry Pis. Simply mount the Camera by pushing it into the Top…
This model is compatible with the lego system.
Ak-47 Assault Rifle Replica, one piece model! If you like the model please leave a comment and a make! Disclaimer: This 3D model is provided on Printables for personal and lawful use only. It is intended exclusively as a toy, prop, or…
This model is compatible with the lego system.
AK47/AK74/AR MAG 3X wallmount Bed organic supports recommended 0,2 layers
Scroll through your social media feed or sit back and enjoy your favorite video content with this universal phone stand. This model only takes 6.81 grams of filament to print, yet it is surprisingly sturdy and stable. The print time is 47…
Large verison of Boeing 747, also know as Jumbo jet or Queen of the skies. Finished model is aprox. 1.4m long when printed on MK3s printer . Can be easily scaled down for smaller printers. After assembly remove one thin part, in front of…
Designed these from pictures to fit my Bulldog AEG AK-47. No idea if they're dimensionally accurate to the real thing, I just designed these in proportion to my AK. Take a look at the models and check if they will fit your model. The…
Simple 2d design of the AK47.I will make more guns if you want to suggest them let me know in the comments.
Ersatz/Reparatur-Zahnrad Schredder 10-47-30° 02 Es gibt jetzt einen verstärken Nachfolger : https://www.printables.com/model/1103048-ersatzreparatur-zahnrad-fur-aktenvernichterschredd ! Entleert Euren Schredder regelmäßig ! denn wenn…
This model is compatible with the lego system.
This model is compatible with the lego system.
Komplettrad für bessere traktion. Felge aus ASA-X, reifen aus TPU bzw TPE Felgen sind mit 2kg blei gefüllt und somit ist die traktion perfekt. ( 2kg Bleikugeln 4mm Durchmesser ) Wurde dann mit epoxidharz ausgegossen Reifen wurde mit 50%…
Boeing 747-800, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Planes collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Its a bit of a tight fit for the upper rail guard.
![#0047 [Improved] AAA and AA Battery Dispenser [FIFO]](https://media.printables.com/media/prints/342818/images/3114289_9dbb7532-1ed8-47a8-9f15-244d1a02d810/rl-20230114-007.jpg)
